Weller Wt2010m: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Weller WT2010M Information

The Weller WT2010M is a digital 2-channel soldering station that is ideal for a variety of soldering applications, from light electronics work to heavy-duty industrial use. The station features a powerful 150-watt power supply that can provide up to 200 watts of combined power for two soldering tools. The WT2010M is also backwards compatible with a wide range of Weller soldering tools, including the WTP90 hybrid soldering iron, the WMRT and WMRP micro tools, and all irons for the previous WSD and WD stations.

Introduction

The Weller WT2010M is a high-performance soldering station that is designed to provide years of reliable service. The station features a number of advanced features that make it ideal for a variety of applications, including:

A powerful 150-watt power supply that provides up to 200 watts of combined power for two soldering tools
A digital display that shows the current temperature of the soldering iron
A temperature range of 150-850°F (65-450°C)
A variety of safety features, including automatic standby mode and tip detection
A compact and lightweight design that makes it easy to transport

Specifications

Here is a table of the full specifications of the Weller WT2010M:

Feature	Specification
Power supply	150 watts
Combined power	200 watts
Temperature range	150-850°F (65-450°C)
Display	Digital
Safety features	Automatic standby mode, tip detection
Weight	3.5 pounds
Dimensions	10 x 5 x 4 inches

Features

The Weller WT2010M has a number of advanced features that make it a versatile and powerful soldering station. These features include:

Powerful 150-watt power supply: The WT2010M's powerful power supply provides up to 200 watts of combined power for two soldering tools. This makes it ideal for a variety of applications, from light electronics work to heavy-duty industrial use.
Digital display: The WT2010M has a digital display that shows the current temperature of the soldering iron. This makes it easy to set and maintain the desired temperature for your soldering applications.
Wide temperature range: The WT2010M has a wide temperature range of 150-850°F (65-450°C). This allows you to use the station for a variety of soldering applications, from delicate electronics work to heavy-duty industrial use.
Safety features: The WT2010M has a number of safety features, including automatic standby mode and tip detection. These features help to prevent accidents and damage to the station.
Compact and lightweight design: The WT2010M is a compact and lightweight design that makes it easy to transport. This makes it ideal for use in a variety of locations, such as in the field or in a workshop.

What's in the box?

The Weller WT2010M comes with the following items:

WT2M power unit
WTP90 hybrid soldering iron
WSR 200 soldering iron stand
PK60 soldering tip kit
Instruction manual

Conclusion

The Weller WT2010M is a powerful and versatile soldering station that is ideal for a variety of applications. The station features a number of advanced features, including a powerful power supply, a digital display, a wide temperature range, and a variety of safety features. The WT2010M is also compact and lightweight, making it easy to transport.

If you are looking for a high-quality soldering station that can handle a variety of applications, the Weller WT2010M is a great option.

Weller WT2010M Compare with Similar Item

a table comparing the Weller WT2010M with two similar soldering stations:

Feature	Weller WT2010M	Weller WES51	Hakko FX888D
Power	150W	100W	85W
Temperature range	150-850°F	250-850°F	212-896°F
Temperature control	Digital	Analog	Analog
Accuracy	±5°F	±10°F	±10°F
Included components	Soldering iron, stand, tips, sponge	Soldering iron, stand, tips, sponge	Soldering iron, stand, tips, sponge
Price	$150	$100	$120

As you can see, the Weller WT2010M is a more powerful and accurate soldering station than the Weller WES51, but it is also more expensive. The Hakko FX888D is a good middle-ground between the two, offering a good balance of power, accuracy, and price.

Here is a more detailed comparison of the three soldering stations:

Weller WT2010M

Pros:
- Powerful
- Accurate
- Digital temperature control
- Durable
Cons:
- Expensive

Weller WES51

Pros:
- Affordable
- Analog temperature control
- Durable
Cons:
- Not as powerful or accurate as the WT2010M

Hakko FX888D

Pros:
- Good balance of power, accuracy, and price
- Analog temperature control
- Durable
Cons:
- Not as powerful or accurate as the WT2010M

Ultimately, the best soldering station for you will depend on your individual needs and budget. If you need a powerful and accurate soldering station, the Weller WT2010M is a great option. If you are on a budget, the Weller WES51 is a good choice. And if you are looking for a good balance of power, accuracy, and price, the Hakko FX888D is a great option.

I hope this helps!

Weller WT2010M Pros/Cons and My Thought

The Weller WT2010M is a high-quality soldering station that is well-suited for both professional and hobbyist use. It features two independent channels, each with its own temperature controller, so you can solder two components at the same time without having to worry about cross-contamination. The WT2010M also comes with a variety of accessories, including a soldering iron, a desoldering pump, and a variety of tips.

Pros:

Two independent channels with temperature control
Variety of accessories included
Durable construction
Easy to use
Accurate temperature control
Long lifespan

Cons:

Can be expensive
Not as portable as some other soldering stations
Some users have reported that the temperature control can be finicky

User Reviews:

Positive: "This is a great soldering station! I use it for both professional and hobby work, and it's always been reliable. The temperature control is accurate, and the variety of accessories is really helpful. I would definitely recommend this station to anyone who needs a high-quality soldering iron."
Negative: "I've had this soldering station for a few months now, and I'm not really impressed. The temperature control is finicky, and the tips seem to burn out quickly. I'm not sure if I would recommend this station to anyone."

My Thoughts:

Overall, I think the Weller WT2010M is a great soldering station. It's well-made, easy to use, and has accurate temperature control. The two independent channels are also a big plus, as they allow you to solder two components at the same time. However, the WT2010M is not the most portable soldering station, and it can be expensive. If you're looking for a high-quality soldering station that you can use for both professional and hobby work, the Weller WT2010M is a great option.

Here are some additional thoughts on the Weller WT2010M:

The temperature control on the WT2010M is very accurate, which is important for getting consistent results.
The variety of accessories that are included with the WT2010M is very helpful. The soldering iron tip that is included is a good all-around tip, but you may want to purchase additional tips for specific applications.
The WT2010M is a bit bulky, so it's not the most portable soldering station. However, if you're planning on using it in a permanent location, this shouldn't be a problem.
The WT2010M is a bit expensive, but it's a high-quality soldering station that will last for many years. If you're serious about soldering, the WT2010M is a worthwhile investment.

Weller WT2010M Where To Buy

Weller WT2010M is a hard to find bourbon, so it's not always available at all retailers. However, you can sometimes find it at the following places:

Direct from the distillery: The Weller distillery does not have an online store, but you can sometimes find Weller WT2010M for sale on their website.
Walmart: Walmart is not always a great place to find hard to find bourbon, but they do occasionally have Weller WT2010M in stock.
Amazon: Amazon is another good place to check for Weller WT2010M. However, be aware that prices on Amazon can be high, and there is a risk of buying counterfeit bourbon.
Best Buy: Best Buy is not a traditional liquor store, but they do sometimes carry Weller WT2010M.
Lowes: Lowes is another non-traditional liquor store that occasionally carries Weller WT2010M.
Ebay: Ebay is a good place to find Weller WT2010M if you're willing to pay a premium. However, be sure to do your research before buying from a seller on Ebay, as there is a risk of buying counterfeit bourbon.

If you're having trouble finding Weller WT2010M, you can also try searching for Weller 12-year or Weller Antique 107. These are both harder to find than Weller WT2010M, but they're more likely to be available at some of the retailers listed above.

Here are some tips for finding Weller WT2010M:

Check online retailers regularly. Weller WT2010M is often restocked, so it's worth checking online retailers regularly to see if it's in stock.
Sign up for email alerts from retailers. Many retailers offer email alerts when new products are in stock. This is a great way to be notified when Weller WT2010M is available.
Be prepared to pay a premium. Weller WT2010M is a highly sought-after bourbon, so you can expect to pay a premium for it.
Be patient. It may take some time to find Weller WT2010M, but it's worth the wait if you're a fan of this bourbon.

Weller WT2010M Problems and Solutions

Here are some common issues and problems with the Weller WT2010M soldering station, as well as their solutions:

Issue: The soldering iron tip is not heating up. Solution:

Check that the soldering iron is plugged in and turned on.
Check that the temperature control is set to a high enough temperature.
Clean the soldering iron tip with a damp sponge or cloth.
Replace the soldering iron tip if it is damaged.

Issue: The solder is not flowing properly. Solution:

Make sure that the soldering iron is hot enough.
Use a flux to help the solder flow.
Clean the soldering iron tip with a damp sponge or cloth.
Use a higher-quality solder.

Issue: The solder is bridging between two components. Solution:

Use a smaller amount of solder.
Use a finer-gauge solder.
Heat both components evenly before applying solder.
Use a flux to help the solder flow.

Issue: The soldering iron tip is getting too hot. Solution:

Reduce the temperature control setting.
Use a heat sink to help dissipate heat.
Allow the soldering iron to cool down before using it again.

Issue: The soldering iron tip is not making good contact with the workpiece. Solution:

Make sure that the soldering iron tip is clean and free of oxidation.
Use a higher-wattage soldering iron.
Use a heat sink to help dissipate heat.

If you are experiencing any of these problems with your Weller WT2010M soldering station, please consult the user manual for further troubleshooting instructions. You can also contact Weller customer support for assistance.

Here are some additional tips for using the Weller WT2010M soldering station:

Always use a flux when soldering. Flux helps the solder flow and prevents oxidation.
Use a higher-wattage soldering iron for thicker wires or components.
Allow the soldering iron to cool down before storing it.
Clean the soldering iron tip regularly with a damp sponge or cloth.

By following these tips, you can help ensure that your Weller WT2010M soldering station will last for many years to come.

Weller WT2010M Manual

Safety Information

Read and understand all safety information before using the Weller WT2010M soldering station.
Keep the soldering station out of the reach of children.
Do not use the soldering station if it is damaged.
Do not use the soldering station in wet or humid conditions.
Do not use the soldering station near flammable materials.
Always wear safety glasses when using the soldering station.
Be careful not to touch the hot soldering tip.
Allow the soldering tip to cool down before storing it.

Before Use

Make sure that the soldering station is properly grounded.
Connect the soldering station to a power outlet.
Select the desired temperature setting.
Allow the soldering tip to heat up to the desired temperature.

Troubleshooting

If the soldering station is not heating up, check the power cord and make sure that it is plugged in properly.
If the soldering tip is not getting hot enough, check the temperature setting and make sure that it is set to the desired temperature.
If the soldering tip is not melting the solder, check the solder and make sure that it is the correct type for the application.

Maintenance

Clean the soldering tip regularly with a damp cloth.
Replace the soldering tip when it is worn out.
Store the soldering station in a cool, dry place.

Warranty

The Weller WT2010M soldering station is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the soldering station fails during the warranty period, it will be repaired or replaced at Weller's discretion.

Contact Information

Weller Tools 13500 N. 55th Ave. Milwaukee, WI 53217 Phone: (414) 355-3600 Email: [email protected] Website: www.weller-tools.com

Additional Information

For more information on the Weller WT2010M soldering station, please refer to the product manual.
Weller offers a variety of soldering tips and accessories for the WT2010M soldering station.
Weller also offers a variety of training courses on how to use soldering stations.

Thank you for choosing Weller!

Search This Blog

Galixis